info@kps.com.vn
+ 84 903 709 019
The LTC 8786 Series of data converters are designed to convert Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" into Allegiant Bi-Phase control code. These units are specifically designed to transform a single data output from a PC-based DVR (or a similar device) into multiple control code outputs for operating AutoDome cameras. The Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" is a simplex RS-232 data format designed to communicate with the Bosch line of receiver/drivers, AutoDome cameras, LTC 8786 converters, and other compatible accessory devices. Complete information on the protocol can be obtained by downloading the manual from the AutoDome section of www.boschsecuritysystems.com. The input RS-232 baud rate of the LTC 8786 Series is fixed at 9600 baud, 1 stop bit, 8 data bits, no parity, and no handshake. The LTC 8786 Series units can be connected directly to the RS-232 serial port of a PC using an industry standard null modem cable. If another connection type is required, an interface cable can easily be constructed using the supplied 9-Pin D connector.
Feature
Model
Hybrid recording of up to 16 IP and 16 analog channels
Xem chi tiết
Hybrid recording of up to 16 IP and 16 analog channels
Xem chi tiết
32 IP channels with 320 Mbps incoming bandwidth
Xem chi tiết
32 IP channels with 320 Mbps incoming bandwidth
Xem chi tiết
16 IP channels with 256 Mbps incoming bandwidth
Xem chi tiết
All-in-one recording, viewing, and management solution for network surveillance systems of up to 32 channels.
Xem chi tiết
Vandal-resistant IP dome day/night camera for outdoor HD surveillance with motion/tamper/audio detection.
Xem chi tiết
All-in-one recording solution for network surveillance systems.
Xem chi tiết
2010-2019 © Bản quyền thuộc KPS
Đang Online: 49 | Tổng Truy Cập: 8696627
Giới Thiệu | Tuyển dụng | Tin tức | Liên Hệ