info@kps.com.vn
+ 84 903 709 019
The LTC 8786 Series of data converters are designed to convert Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" into Allegiant Bi-Phase control code. These units are specifically designed to transform a single data output from a PC-based DVR (or a similar device) into multiple control code outputs for operating AutoDome cameras. The Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" is a simplex RS-232 data format designed to communicate with the Bosch line of receiver/drivers, AutoDome cameras, LTC 8786 converters, and other compatible accessory devices. Complete information on the protocol can be obtained by downloading the manual from the AutoDome section of www.boschsecuritysystems.com. The input RS-232 baud rate of the LTC 8786 Series is fixed at 9600 baud, 1 stop bit, 8 data bits, no parity, and no handshake. The LTC 8786 Series units can be connected directly to the RS-232 serial port of a PC using an industry standard null modem cable. If another connection type is required, an interface cable can easily be constructed using the supplied 9-Pin D connector.
Feature
Model
FLEXIDOME IP panoramic 7000 IC
Xem chi tiết
FLEXIDOME IP panoramic 6000 IC
Xem chi tiết
FLEXIDOME IP dynamic 7000 VR
Xem chi tiết
FLEXIDOME IP dynamic 7000 RD
Xem chi tiết
FLEXIDOME IP starlight 7000 VR
Xem chi tiết
FLEXIDOME IP starlight 7000 RD
Xem chi tiết
FLEXIDOME IP starlight 6000 VR
Xem chi tiết
DINION IP starlight 7000 HD
Xem chi tiết
DINION IP starlight 6000 HD
Xem chi tiết
2010-2019 © Bản quyền thuộc KPS
Đang Online: 22 | Tổng Truy Cập: 8699634
Giới Thiệu | Tuyển dụng | Tin tức | Liên Hệ