info@kps.com.vn
+ 84 903 709 019
The LTC 8786 Series of data converters are designed to convert Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" into Allegiant Bi-Phase control code. These units are specifically designed to transform a single data output from a PC-based DVR (or a similar device) into multiple control code outputs for operating AutoDome cameras. The Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" is a simplex RS-232 data format designed to communicate with the Bosch line of receiver/drivers, AutoDome cameras, LTC 8786 converters, and other compatible accessory devices. Complete information on the protocol can be obtained by downloading the manual from the AutoDome section of www.boschsecuritysystems.com. The input RS-232 baud rate of the LTC 8786 Series is fixed at 9600 baud, 1 stop bit, 8 data bits, no parity, and no handshake. The LTC 8786 Series units can be connected directly to the RS-232 serial port of a PC using an industry standard null modem cable. If another connection type is required, an interface cable can easily be constructed using the supplied 9-Pin D connector.
Feature
Model
VDA-PLEN-DOME In-ceiling Housing for Plenums
Xem chi tiết
UHO PoE Outdoor Camera Housing
Xem chi tiết
UHO Outdoor Camera Housings
Xem chi tiết
UHI‑OG(S)‑0 Indoor Camera Housing
Xem chi tiết
IntuiKey Series Keyboards
Xem chi tiết
MIC Mounting Brackets and Other Accessories
Xem chi tiết
EXPB-3-W-KIT Camera and IR Illuminator Wall-mount Kit
Xem chi tiết
2010-2019 © Bản quyền thuộc KPS
Đang Online: 8 | Tổng Truy Cập: 8696247
Giới Thiệu | Tuyển dụng | Tin tức | Liên Hệ