info@kps.com.vn
+ 84 903 709 019
The LTC 8786 Series of data converters are designed to convert Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" into Allegiant Bi-Phase control code. These units are specifically designed to transform a single data output from a PC-based DVR (or a similar device) into multiple control code outputs for operating AutoDome cameras. The Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" is a simplex RS-232 data format designed to communicate with the Bosch line of receiver/drivers, AutoDome cameras, LTC 8786 converters, and other compatible accessory devices. Complete information on the protocol can be obtained by downloading the manual from the AutoDome section of www.boschsecuritysystems.com. The input RS-232 baud rate of the LTC 8786 Series is fixed at 9600 baud, 1 stop bit, 8 data bits, no parity, and no handshake. The LTC 8786 Series units can be connected directly to the RS-232 serial port of a PC using an industry standard null modem cable. If another connection type is required, an interface cable can easily be constructed using the supplied 9-Pin D connector.
Feature
Model
AUTODOME IP 5000 IR, 30x 720p30/1080p30 HD camera with outdoor pendant housing and sunshield
Xem chi tiết
Camera IP quay quét của Bosch với khả năng xác định vị trí, theo dõi và zoom cận cảnh đối tượng nhanh và dễ dàng
Xem chi tiết
NDP-5502-Z30L PTZ dome 2MP 30x IP66 pendant
Xem chi tiết
FLEXIDOME IP outdoor 5000i
Xem chi tiết
FLEXIDOME IP outdoor 4000i
Xem chi tiết
FLEXIDOME IP indoor 4000i
Xem chi tiết
NBE-6502-AL Bullet 2MP HDR 2.8-12mm auto IP67 IK10
Xem chi tiết
NBE-5503-AL Bullet 5MP HDR 2.7-12mm auto IP67 IK10
Xem chi tiết
NBE-4502-AL Bullet 2MP 2.8-12mm auto IP67 IK10
Xem chi tiết
VP-CFGSFT Configuration Tool for Imaging Devices
Xem chi tiết
IVA 4.0 Intelligent Video Analysis
Xem chi tiết
2010-2019 © Bản quyền thuộc KPS
Đang Online: 11 | Tổng Truy Cập: 8696297
Giới Thiệu | Tuyển dụng | Tin tức | Liên Hệ