Consulting on choosing the right vandal-proof camera for your needs

NGÀY ĐĂNG 18/09/2025

Admin

Not all cameras are durable enough to operate stably in factory, construction site or warehouse environments - where there is always a risk of vandalism and collision. That is why IK10 standard vandal-proof cameras are becoming a strategic choice in modern security surveillance.

Alarming reality: Cameras are being vandalized more and more

In many public and industrial areas today, intentional vandalism of surveillance cameras is becoming more and more common. From acts such as using hard objects to smash, spray paint to cover the lens to bending, shielding or disabling the power source - all of which paralyze the security system when it is most needed.

It is worth mentioning that most of these vandalism incidents take place in high-risk areas such as factories, construction sites, parking lots, schools, bus stations, etc., where cameras need to operate 24/7 to ensure safety. When a camera is disabled, the entire area can become a security "blind spot".

So what is the solution? IK10 vandal-proof cameras are the optimal choice to protect the device from strong physical impacts - ensuring durable and continuous monitoring.

What is a vandal-proof camera?

A vandal-proof camera is a line of surveillance cameras specially designed with a sturdy outer shell, resistant to strong impacts, intentional damage or physical impact in harsh environments.

These cameras often meet the IK10 protection standard - the highest level in the scale of impact resistance of electronic devices, can withstand an impact force of up to 20 joules (equivalent to a strong hammer blow).

Unlike conventional cameras that are easily broken, smashed or disassembled, vandal-proof cameras are fixed and have a super-durable metal or compound shell, protecting the internal equipment from intentional sabotage - often occurring in factories, construction sites, public corridors, bus stations, etc.

Areas where IK10 shell cameras are required

Factory - industrial park

In the production environment, cameras are often installed in areas such as: warehouse entrances, operating lines, material receiving areas, etc. These are places where many forklifts, carts, industrial machinery and equipment operate continuously, which can collide or break the camera at any time.

In addition, the factory environment also has dust, vibration, humidity or chemical factors - requiring the camera to have a super-durable shell, good impact resistance and corrosion resistance, ensuring that the surveillance image is not interrupted when there is an unexpected collision or accident.

Construction site

This is a place that always has a high risk of collision. The camera can be hit by mechanical equipment (cranes, excavators, concrete mixers), be hit by objects falling from above, or accidentally damaged by workers or strangers. In addition, rainy weather, fine dust from cement, sand and rocks are also factors that reduce the life of conventional cameras.

Therefore, cameras that meet IK10 standards (impact-resistant housing) combined with IP66/67 water and dust resistance are the optimal solution for safe and continuous construction site monitoring.

Bus stations - train stations - airports

In public places with high traffic, cameras often face unintentional or intentional acts of vandalism, such as: smashing, using foreign objects to cover the lens, or intentionally turning the camera in the wrong direction.

Especially in areas such as luggage storage areas, ticket control gates, waiting rooms, etc., cameras can be pushed by passengers or collided when there is an incident. IK10 cameras with metal housing design, fixed mounting will help increase durability and reduce the risk of paralyzing the security system.

Schools - residential areas

In schoolyards, dormitory corridors or collective housing areas, cameras are easily damaged, broken or covered by objects by children. These are areas with a lot of people passing by but no direct 24/7 monitoring personnel.

Using anti-vandal cameras helps ensure property safety, monitor violations, and keep the device operating stably without having to constantly repair or replace due to damage.

Elevators - building corridors

Elevators and corridors are narrow spaces, easily impacted when transporting furniture, carts or when there are arguments and fights. Cameras installed here, if not covered with anti-vandal housing, will be easily disassembled or damaged.

Cameras with IK10 housing, ceiling mounted or anti-disassembly design, help maintain continuous operation in environments prone to collisions, while improving the ability to collect incident data.

Parking lot - shopping mall

Parking lots often have vehicles coming and going continuously, high risk of collision, sometimes even intentional acts of vandalism to "erase traces" after collision. Meanwhile, cameras in shopping malls are often installed near escalators, service counters, entrances... - places with many people approaching.

IK10 housing cameras will help protect the device from strong impacts from vehicles or people, maintain a stable security system, and avoid loss of important image data.

Factors needed in a good anti-vandal camera

IK10 impact resistance standard - super durable shell

• IK10 is the highest standard according to the IK scale (impact protection rating), allowing the camera to withstand impacts up to20 joules.
• The camera must have a sturdy metal, polycarbonate or alloy shell, usually a dome or bullet design with a monolithic design, to avoid disassembly.

Good dust and water resistance (IP66/IP67)

• In addition to being able to withstand force, the vandal-proof camera must also be able to resist dust, water, and wind if installed outdoors.
• The IP66 or IP67 standard helps the camera operate stably even in bad weather conditions, lots of dust, and high humidity.

Fixed design - prevents unauthorized disassembly

• The camera must be designed to be securely mounted on a wall, ceiling, or hard surface, to avoid disassembly or rotation by unauthorized persons.
• Some high-end models have anti-lid prying and anti-shell breaking features, with a warning system if there is an unusual impact.

Integrated AI or intelligent image analysis

Anti-vandalism cameras should not only be durable, but also have the ability to detect suspicious behavior, for example:

• Identify people approaching for a long time.
• Warn when there is an action of covering the lens or shaking the device.
• Some i-PRO or Bosch models also support AI Auto Tracking to help track vandals.

High image quality - night support

• The camera should have a resolution of 2MP or higher, support IR or Color Night View, ensuring sharp image recording even in low light conditions.
• Especially important in elevators, hallways, parking lots at night, where stealth vandalism often occurs.

Security system integration

A good camera needs to support NVR, VMS, cloud storage connection or integration with alarm systems, access control to handle quickly when incidents occur.
Some models also support AI metadata, which is very useful for later analysis.

Recommended i-PRO anti-vandal camera models

i-PRO WV-S15700-V2LN

• Outdoor Bullet, versatile, with IK10 housing and IP66/NEMA4X dust and water resistance
• Resolution: 4K (3840×2160) for outstanding sharpness; 2× optical zoom, 104° to 53° viewing angle
• AI function: Built-in AI Engine for human/vehicle recognition and intelligent image analysis right on the device
• High-level security: Built-in FIPS 140-2 Level3 security chip (EdgeLock®SE050F), NDAA compliant

WV‑S25700‑V2LG

• Type: 4K Outdoor Vandal Dome
• IK10 + IP66, resistant to high impact and dusty weather
• Super Dynamic 132dB, color night vision, built-in IR
• AI Engine & FIPS‑140‑2 Level3 high security

WV‑S25700‑V2LN1

• Type: 4K Outdoor Vandal Dome (upgrade)
• IK10, IP66/67, NEMA‑4X standard – durable in harsh environments
• 4K high definition. 2× optical zoom, IR up to 70m, ClearSight coated glass
• Integrated AI Engine, FIPS 140‑2 Level3 security, Smart Coding saves bandwidth.

Also see:

• WV‑S15500‑V3LK: Bullet 5MP, IK10, IP66, color vision & integrated AI.
• WV‑S10700‑V2LN / WV-S15700-V2LN: Bullet metal housing, IK10, integrated AI.

Contact for advice

KPS - Official distributor of leading brands such as i-PRO (Panasonic), BOSCH, CNB, ... is committed to providing genuine equipment, full technical certificates and consulting solutions suitable for each practical requirement.

With experience in implementing hundreds of factory, seaport and industrial park projects nationwide - KPS is a trusted partner of businesses in selecting, installing and maintaining high-quality surveillance camera systems.

Contact KPS now for technical advice & quick quotes!