DI-M9301 control module

DI-M9301 Control Module

The DI-M9301 Single Digital Input & Output Module provides a dry contact output (Normally Open and/or Normally Closed) controlled by the Fire Alarm Control Panel (FACP).
It can also receive switching signals (dry contacts) from field devices and transmit them to the FACP.
The input and output can be programmed to monitor and control the same device or different devices.

Key Features

• Class B input wiring with end-of-line supervision using a 4.7kΩ resistor

• Input can be programmed to monitor Normally Open (NO) or Normally Closed (NC) dry contacts

• Input can be programmed as “self-feedback”, meaning the input supervision is disabled and the module directly sends a status signal to the FACP when the dry contact output changes state

• Address can be set on-site using a programmer

• Input uses AD sampling technology for accurate detection

• Compatible with GST-M200 and GST-IFP4M fire alarm control panels

• Easy installation

• Standards: UL 864, NFPA 70 & NFPA 72

Technical Specifications

• Operating Voltage: 24VDC loop power (16VDC – 28VDC), power-limited

• Standby Current: ≤ 0.28 mA

• Operating Current: ≤ 0.7 mA

• Output Rating: 2A @ 30VDC, 0.35 PF, Normally Open / Normally Closed

• Operating Environment:

  • Temperature: 0°C to +49°C

  • Relative Humidity: ≤ 93%, non-condensing

• Dimensions: 78 mm × 45.3 mm × 28.5 mm