Conventional Ultra-Violet Flame Detector
Conventional Ultra-Violet Flame Detector

TECHNICAL NUMBERS

• Rated working voltage: DC24V Working voltage range: DC16V~DC28V
• Monitoring current: ≤2.5mA Alarm current: ≤15mA
• Output capacity: normally open passive output, contact capacity 1A, DC24V
• Output control mode: self-locking after alarm
• Alarm reset: instantaneous power failure (5sMAX, DC2.5VMAX)
• Power-on time ≤5s
• Indicator light: alarm confirmation light, red, flashing periodically during monitoring, and always on when alarming
• Spectral response range: 185nm～260nm
• Detection distance: The detector has three sensitivity levels, and different sensitivity levels correspond to different detection distances. For the flame produced by burning 2000g of industrial ethanol in a container with a bottom area of ​​33cm×33cm and a height of 5cm: first level, 25m; second level, 17m; third level, 12m
• Wire system: two-wire system without polarity
• Use environment: temperature: -20℃～+55℃ relative humidity: relative humidity ≤95%, no condensation
• Dimensions: diameter: 103mm, height: 53.5mm (with base) diameter: 100mm, height: 41mm (without base)
• Shell protection grade: IP21
• Shell material and color: ABS, ivory white
• Weight: 110g
• Installation hole distance: 45mm～75mm

LIÊCONTACT 

Nhà GST By Carrier Fire Alarm Distribution - KPS Company 

• Contact: Ms.An
• Phone: 028 39976099
• Email: salesadmin1@kps.com.vn
• Address: No. 10-12 Dong Van Cong, Thanh My Loi Ward, Thu Duc 

Warranty Center - KPS Company 

• Contact: Ms. Thao
• Phone: 028 39970609
• Address: 10-12 Dong Van Cong, Thanh My Loi Ward, Thu Germany 
• Email: baohanh@kps.com.vn