info@kps.com.vn
+84 903 709 019
Switch Managed 24 Port Gigabit 4 SFP 10G NM3100-24G-4X
- Product Code: NU1100-8FP-2GS
- Product Series: Switches
- Manufacturer: CNB
- Warranty: ** months
Switch Managed 24 Port Gigabit 4 SFP 10G NM3100-24G-4X
The NM3100-24G-4X is a high-performance Layer 3 managed switch designed for enterprise networks and campus systems.
Features
- 24 Gigabit Ethernet Ports for Versatile Connectivity
- High-Speed 10G SFP+ Uplink Ports
- Support for ERPS (Ethernet Ring Protection Switching)
- Advanced QoS (Quality of Service) Capabilities
- Support for OSPF (Open Shortest Path First) Routing
Specifications
| NM3100-24G-4X | |
| 10M/100M/1G RJ45 copper ports | 24 |
| 1G/2.5G/10G SFP+ (fiber) ports | 4 |
| Console Port (For config ) | Yes (For switch management and setup) |
| USB port | Yes (For firmware and config upload/ download） |
| Reset button | Yes (For system factory default and reboot) |
| Performance Specification | |
| Packet buffer memory | 12Mb (Dynamically shared across only used ports) |
| Forwarding modes | Store-and-forward |
| Bandwidth | 256 Gbps |
| Packet forwarding rate | 96Mpps (64 byte packet size) |
| MAC address database size | 16K (48-bit MAC ad-dresses) |
| Jumbo frame support | Up to 12K packet size |
| Mean Time Between Failures | 116,361 hours |
| 100M Copper Latency : |
8.321µs; 8.401µs; 8.449µs (64-byte; 1518-byte; 9216-byte frames) |
| 1G Copper Latency : |
3.432µs; 3.521µs; 3.625µs (64-byte; 1518-byte; 9216-byte frames) |
| 1G Fiber Latency : |
2.975µs; 3.111µs; 3.186µs (64-byte; 1518-byte; 9216-byte frames) |
| 2.5G Fiber Latency : |
2.635µs; 2.862µs; 2.996µs (64-byte; 1518-byte; 9216-byte frames) |
| 10G Fiber Latency : |
2.330µs; 2.561µs; 2.7129µs (64-byte; 1518-byte; 9216-byte frames) |
| L2 Services - VLANs | |
| IEEE 802.1Q VLAN tagging : | Yes |
| QinQ VLAN tagging : | Yes |
| IP-based VLANs : | Yes |
| MAC-based VLANs : | Yes |
| Protocol-based VLAN : | Yes |
| Voice VLAN : | Yes |
| VLAN mapping : | Yes |
| L2 Services - Availability | |
| Storm control | Yes (Broadcast, multicast, unknown unicast) |
| IEEE 802.3ad - LAGs (LACP) | Yes |
| IEEE 802.3x | Yes (full duplex and flow control) |
| Ring (ERPS, complies with G.8032) | Yes, Recovery time < 50ms |
| IEEE 802.1D Spanning Tree Protocol | Yes |
| IEEE 802.1w Rapid Spanning Tree Protocol | Yes |
| IEEE 802.1s Multiple Spanning Tree Protocol | Yes |
| Layer 2 DHCP Relay | Yes |
| L2 Services - Multicast Filtering | |
| IGMP snooping (v1, v2 and v3) | Yes |
| MLD snooping support (v1 and v2) | Yes |
| IGMP snooping querier (v2) | Yes |
| MLD snooping querier (v1) | Yes |
| Multicast VLAN Registration (MVR) | Yes |
| L3 Services - DHCP | |
| DHCP client | Yes |
| DHCP snooping | Yes |
| DHCP Server | Yes |
| L3 Services - Routing | |
| IPv4 static routing | Yes |
| IPv6 static routing | Yes |
| VLAN routing | Yes |
| RIP V1/V2 | Yes |
| OSPF V2 | Yes |
| Number of IP VLAN interfaces | Yes |
| Policy routing | Yes |
| VRRP | Yes |
| Link Aggregation | |
| Manual LAG | Yes |
| # of LAGs / # of members in each LAG | 8 LAGs with max 8 members in each LAG |
| Network Monitoring and Discovery Services | |
| 802.1ab LLDP | Yes |
| SNMP | v1, v2c, v3 |
| RMON group 1,2,3,9 | Yes |
| Network Security | |
| IEEE 802.1x | Yes |
| RADIUS accounting | Yes |
| Access Control Lists (ACLs) | Yes |
| IP-based ACLs (IPv4 and IPv6) | L2 / L3 / L4 |
| MAC-based ACLs | Yes |
| TCP/UDP-based ACLs | Yes |
| Control MAC # static entries | 48 |
| Port-based security by locked MAC addresses | Yes |
| Dynamic ARP inspection | Yes |
| DoS protection | |
| DoS attacks prevention | Yes |
| Network storm protection, DoS | Yes |
| Quality of Service (QoS) | |
| Port-based rate limiting | Yes ingress and egress |
| Port-based QoS | Yes |
| Support for IPv6 fields | Yes |
| DiffServ QoS | Yes ingress |
| IEEE 802.1p COS | Yes |
| Destination MAC and IP | Yes |
| IPv4 and v6 DSCP | Yes |
| TCP/UDP-based | Yes |
| Weighted Round Robin (WRR) | Yes |
| Strict priority queue technology | Yes |
| IEEE Network Protocols | |
| Protocols |
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T• IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX • IEEE 802.3bz 2.5G BASE-X • IEEE 802.3ae 10G BASE-X • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) |
| Protocols 2 |
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w(RSTP) |
| Management, Monitoring & Troubleshooting | |
| Password management | Yes |
| Access control via RADIUS and TACACS+ | Yes |
| IPv6 management | Yes |
| SNMP v1/v2c/v3 | Yes |
| Port mirroring | Yes |
| Many-to-one port mirroring | 24 |
| Cable test utility | Yes |
| TLS/HTTPS Web-based access (version) | Yes (v1.2) |
| File transfers (uploads, downloads) | TFTP / HTTP |
| HTTP upload/download (firmware) | Yes |
| Syslog (RFC 3164) | Yes |
| LEDs | Yes |
| Per port | Speed, Link, Activity; or PoE in different mode |
| Per device | Power, system |
| Physical Specifications | |
| Dimensions (Width * Depth * Height) | 440 x 190 x 44.5 mm (17.32 x 11.42 x 1.75 in) |
| Weight | 2.6 kg (5.72lb) |
| Max power |
15W (worst case, all ports used, line-rate traffic) |
| Iddle power consumption | 11W (all ports link-down standby) (Watts) |
| Energy Efficient Ethernet (EEE) | Yes (deactivated by default) |
| Fan | 2 internal fans, fixed |
| Environmental Specifications | |
| Operating Temperature | -20° to 50°C (-4° to 122°F) |
| Operating Humidity |
90% maximum relative humidity (RH), non-condensing |
| Operating Altitude | 10,000 ft (3,000 m) maximum |
| Storage Temperature | –20° to 70°C (– 4° to 158°F) |
| Storage Humidity (relative) |
95% maximum relative humidity, non-condensing |
| Storage Altitude | 10,000 ft (3,000 m) maximum |
| Electromagnetic Emissions and Immunity | |
| Certifications | CE mark, commercial； FCC Part 15 Class A, VCCI Class A； Class A EN 55022 (CISPR 22) Class A; Class A C-Tick； EN 55024； CCC； 47 CFR FCC Part 15, Subpart B, Class A ICES-003: 2016 Issue 6, Class A； ANSI C63.4:2014； IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013 |
| Safety | |
| Safety Certifications | CB mark, commercial； CSA certified (CSA 22.2 #950)； EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005； (ed.2)+A1:2009+A2:2013； AN/NZS 60950.1:2015 |
| Warranty and Support | |
| Hardware Limited Warranty | Limited Lifetime* |
| Package Contents | |
| All models | Smart Switch； AC Power cord with C13 connector (localized to region of sale) ； Brackets and screws for rack mounting； Rubber protection caps, which are already installed in the SFP sockets Installation guide |
| Business Type | Commercial |
| Bandridth | 1G+10G |
| More Filters | L3 Managed |
Tin tức công ty
New product
Tin công nghệ
Chia sẻ
Services
Solutions
Projects
Recruitment
Related products
IP NETWORK MICROPHONE CNB PN8000-CSLD
The PN8000-CSLD is an IP network announcement microphone (also known as an IP zone call station) designed to broadcast announcements to designated speaker zones via a network. The device can be installed anywhere within a LAN network.
View detail
TWO CHANNEL 8 ZONE IP NETWORK AUD IO ADAPTER PN8008 -ZA
The PN8008-ZA is a two-channel, 8-zone IP network audio converter that supports simultaneous IP audio encoding and decoding. It converts analog audio sources such as microphones, MP3 players, CDs, or multimedia players into IP audio streams, and decodes the IP audio back into analog outputs for preamplifiers, mixers, or active speakers.
View detail
IP NETWORK AUDIO SYSTEM CONTROLLER PN8000-HC
The PN8000-HC IP network audio system controller is a high-performance solution designed for managing and distributing audio over an IP network. Designed for optimal performance, it ensures high-quality audio transmission in a variety of environments, including commercial, industrial, and residential settings.
View detail
IP Network Fire Alarm Panel PN8032-FA
The PN8032-FA serves as an interface between the fire alarm system and IP-based PA system. It supports 16 independent control inputs to trigger automatic broadcasts of pre-recorded Alert, EVAC, or Clear messages during emergencies.
View detail
PHA series PA power amplifier
The PHA amplifier series consists of high-power PA amplifiers utilizing Class-D switching power supply technology.
This design delivers minimal power consumption and high efficiency—up to 85%. As a result, these amplifiers save rack space, generate less heat, and have a longer lifespan.
View detail
CNB PV8000-AC2 2-channel audio signal converter
The PV8000-AC2 is a high-to-low level audio signal converter designed to work with 100V distributed loudspeaker systems.
View detail
PV8000-CSE2 Call Station Extension CNB
The PV8000-CSE2 is a call station extension designed for use with a remote announcement microphone in a voice alarm system.
View detail
PV8050-MC2 CNB Voice Alarm Controller
The PV8050-MC2 is a multi-functional voice alarm and evacuation controller integrating remote PC software, zoning functions, signal line and amplifier monitoring, speaker monitoring, power management, recording, SD card slot, emergency microphone, and fire alarm interface.
View detail
Voice Alarm Router PV8050-RT2 CNB
The PV8050-RT2 is an 8-zone emergency announcement router (voice alarm router), playing a crucial role in public address and evacuation (PA & Voice Alarm) systems.
View detail
Media Source PA200-UDTB CNB
The PA200-UDTB is an audible alarm device designed for emergency notification systems, allowing for flexible activation via automatic signals and manual operation.
View detail
