MIC-ALM-WAS-24

Electrical Specification

Value

Input Voltage

24 VAC ± 10%, 50/60 Hz

Power Consumption

1.5 W

Surge Suppression - RS-485

Peak Current: 10 A, Peak Power: 300 W

Surge Suppression - Alarm Inputs

Peak Current: 17 A, Peak Power: 300 W

Surge Suppression - Alarm Outputs

Peak Current: 2 A, Peak Power: 300 W

Surge Suppression - Relay Outputs

Peak Current: 7.3 A, Peak Power: 600 W

Surge Suppression - Power Input (Camera)

Peak Current: 7.3 A, Peak Power: 600 W

Miscellaneous

LEDs

Red LED (ON indicates power on)

Green LEDs (blinking indicates activation for each alarm input)

Yellow LED (blinking indicates active communication between the MIC-ALM-WAS-24 and the MIC7000 camera)

Communications

Protocol

Proprietary half-duplex RS-485, 57600 baud

User Connections

Power

24 VAC

Alarm Input

4 normal dry contacts (selectable N.O./N.C.)

2 monitored tamper alarm inputs, 2.2K ohm end-of-line termination

Alarm Output

3 open collector outputs, 32 VDC, 150 mA

Relay Output

1 dry contact relay, 24VAC/VDC, 5 A (for washer pump)

Alarm/Data

3-wire RS-485 (to external alarm/washer accessory unit) up to 100 m

Environmental

Ingress Protection Rating/Standard

IP67, NEMA 4, 4X, 6, 12, 13

Operating Temperature

-40 °C to +60 °C (-40 °F to +140 °F)

Cold Start-up Temperature

-40 °C (-40 °F) (Requires 60 minute warm-up prior to operation)

Storage Temperature

-40 °C to +70 °C (-40 °F to +158 °F)

Humidity

0-100%

Construction

Dimensions (L x W x H)

200 mm x 120 mm x 79 mm (7.9 in. x 4.7 in. x 3.1 in.)

Weight

0.6 kg (1.3 lb)

Construction Material

Polycarbonate

Standard Color

Grey (RAL 7035)

Standard Finish

Sand finish