info@kps.com.vn
+ 84 903 709 019
Module giám sát điều khiển I/O (quạt, thang máy, cửa sập & giám sát)
Electric coding ,Single action in/output, 4 wires, Passive output DC24V/2A, Active output DC24V/1A
THÔNG SỐ KỸ THUẬT
Operating Voltage | Loop: 24V (16V~28V) Power: DC20V~DC28V |
Standby Current | Loop≤0.42mA Power≤2.00mA |
Action Current | Loop≤1.34mA Power≤18.00mA |
Output Capacity | Output contact capacity 30VDC/2A |
Output control mode |
Continuous or Pulse ( Relay N/O, 10 seconds action duration) |
Input cable check | 4k7 OHM EOLR |
Output cable check | Fault on open short-circuit on-circuit and output port |
Programming Method |
Electronically addressed |
Code Range | One address within 1~242. |
Input Indicator | Red. Flashes when polling. Illuminates in action. Double flashes for low power. 2.5Hz 50% duty cycle for cable fault. |
Output indicator | Red. Lit when output activated. 2.5Hz 50% duty cycle for cable fault. |
Ingress Protection Rating |
IP30 |
Operating Temperature |
-10°C ~+55°C |
Relative Humidity | ≤93%, non condensing |
Material of Enclosure |
ABS white |
Dimension (L×W×H) |
86mm×86mm×41mm (with base) |
Weight | About 96.6g (with base) |
LIÊN HỆ
Nhà phân phối báo cháy GST By Carrier - Công ty KPS
2010 © Bản quyền thuộc KPS
Đang Online: 21 | Tổng Truy Cập: 11647717
Giới Thiệu | Tuyển dụng | Tin tức | Liên Hệ
//Basic Speeds //Basic Speeds keypressed = window.event.keyCode; //IE keypressed = e.which; //NON-IE, Standard