The BCM-0000-B Battery Controller Module monitors the power supply of the entire control panel. It controls the charging of up to four batteries (12 V/24 Ah to 12 V/26 Ah or 12 V/36 Ah to 12 V/45 Ah). The charging is actuated by temperature and time. The key has three functions, depending on the state of the battery controller module:

• The LED test of the module is activated by pushing the key.
• The key starts the charging of the batteries if the battery voltage is between 18 V and 21 V. A mains power supply is required.
• The reset of the 24 V outputs. If an error occurs, the output is deactivated.

Feature

• Two voltage outputs of 2.8 A at 24 V each
• Temperature-controlled charging and monitoring of batteries according to EN 54‑4:1997/A2:2006
• Ready to go thanks to plug-and-play technology and pluggable terminal blocks