ARD-SELECT-BOM Reader

ARD-SELECT-BOM Reader

ARD-SELECT-BOM Reader is a black OSDP card reader, supporting MIFARE Classic, MIFARE DESFire EV1 & EV2, LEGIC Prime and LEGIC Advant, with an integrated Bluetooth Low Energy (BLE) module, allowing connection and authentication using mobile devices.

The device can be mounted in the wall or on the surface, providing flexibility in installation. With IP54 protection standard, ARD-SELECT-BOM is dust and water resistant, ensuring stable operation in environmental conditions from -25°C to 60°C, suitable for both indoor and outdoor use.

ARD-SELECT-BOM uses RS485 communication and supports OSDP protocol (including OSDPv2 Secure Channel), ensuring data security and easy integration with modern access control systems.

The device operates on a frequency of 13.56 MHz, has a maximum reading distance of 65 mm (depending on the card type), allowing for quick and accurate identification. In addition, the device has 3 status LEDs, an audible alarm and a tamper detection function, enhancing user experience and ensuring system security.

Specifications

• Size: 88 × 101 × 35 mm (unmounted) / 88 × 101 × 21 mm (mounted)
• Colour: Black
• Material: Plastic
• Weight: 137 g – 139 g
• Protection standard: IP54 (dustproof, light water)
• Operating temperature: -25°C to 60°C
• Operating voltage: 8VDC – 30VDC
• Power consumption: 3.5 VA maximum, 2.5 VA typical
• Status indicator: 3 LEDs
• Sound buzzer: Yes
• Anti-vandal function: Yes
• Reading frequency: 13.56 MHz
• Reading distance: Up to 65 mm (depending on card type)
• Supported cards: MIFARE Classic, MIFARE DESFire EV1 & EV2, LEGIC Prime, LEGIC Advant
• Communication: RS485
• Protocol: OSDP (including OSDPv2 Secure Channel)
• BLE Module: Yes (Bluetooth Low Energy)
• Compatible Systems: BIS, AMS