info@kps.com.vn
+ 84 903 709 019
Syncro Focus
- This simple and attractive repeater panel can be connected to any point on a Syncro network to provide additional display points as needed.
- Using the same large format graphics display as the main control panel ensures that a clear and concise indication is given at all times.
- Ideal for additional building entrances, security desks or nurses stations this unit provides an economical alternative to a full function repeater panel. (Syncro Response) The repeater also acts as a network booster and can be used to extend cable runs beyond the specified lengths as required.
| Mô tả |
| Size (24V DC model) – 330mm x 250mm x 88mm |
| (230v model) – 330mm x 250mm x 88mm (maximum battery size 2Ah) |
| Weight (24V DC model) – 2.5Kg |
| Weight (230V AC model) – 4.0Kg |
| Construction – 1.2mm mild steel and aluminium extrusions |
| Finish – Epoxy powder coated |
| Input voltage (24V model) – 21V DC – 30V DC |
| Input voltage (230V AC model) – 230V AC +10%/-15% |
| Current consumption – 80 milliamps at 24V DC. |
| Contact ratings – 30V DC 1 Amp max |
| Operating temperature - -5 to +40 degrees C |
| Display – 240 X 64 pixel graphic LCD |
| Cable entry – 3 x 20mm knockouts top and bottom |
| Indicators – 5mm high brightness LED. |
| Communications – Syncro System network protocol only |
| Cable length – 1200 metres to alternate nodes |
| Cable type – Belden 9271, Belden 9860 or FP200 Gold |
| Control panel compatibility – Software versions V3.4 and above |
