info@kps.com.vn
+ 84 903 709 019
Series 3000
- The K3000 Series exceeds the requirements of BS5839: Part 4: 1988 in several areas. Inclusion of zone isolate, zonal one man test, zonal contacts, shop unit interface and zoned or two stage alarm outputs are all standard features.
- A wide range of detectors are supported by the equipment, ensuring that the K3000 Series control panels can be used with existing installations without the need to change the field devices. Front panel controls and indicators are kept to a minimum to simplify user operation and to maintain clarity of indication. High intensity, twin bar LED indicators are used on all front panels. All panels are supplied with suitable power supply and generous battery space to give extended battery standby if required.
- Ample cable entries and removable chassis assist in ease of installation. All panels are available as true flush or surface mounting and in two tone grey or cream and brown.
- Other colours are available to special order. Arrangements can be made for special badging or special finishes such as brass or stainless steel.
- K3000 Series control panels allow continued operation of call points and detectors upon removal of a device from the detection line. This can be achieved either by fitting an active end of line device or by using special line clamping bases.
| Mô tả | |
| Construction | 1.2mm mild sheet steel |
| IP Rating | IP30 |
| Finish | Epoxy powder coated |
| Standard colour | BS 00 A 05 grey - fine texture |
| Sounder outputs | 2 outputs each fused at 1 amp each (0.5A E3002001) |
| Isolatable fire contact | Volt free changeover 1A at 30V DC |
| Auxiliary alarm contact | Volt free changeover 1A at 30V DC |
| Fault contact | Volt free changeover 1A at 30V DC |
| Zonal contacts | Volt free normally open 1A at 30V DC |
| Auxiliary DC output | Fused at 500mA |
| Detection zone monitoring resistor | 6k8 |
| Sounder circuit monitoring resistor | 10k |
| Remote control inputs | Alarm input, Silence input, Reset input (option for pulsed alarm input [Security Alert]) |
| Mains supply | 230V AC (+10%/-15%) (other voltages upon request) |
| Call points | Require 470 OHM series resistor |
| Alarm threshold | 100 to 900 Ohms |
| Short circuit threshold | 0 to 100 Ohms |
| Maximum zone quiescent current | 1.6mA |
| Active end of line | K1406K (optional) |
| Operating temperature | -5°C to +40°C |
| Operating humidity | To 95% (non condensing) |
