info@kps.com.vn
+ 84 903 709 019
Multi Input- Output Units
| Tính năng |
| MIOU |
| Multiple inputs and outputs at one address |
| Opto isolated inputs |
| Volt free contact or switched voltage outputs |
| Considerable space and cost saving over discreet |
| I/O units |
| Easy clip-on din rail mounting method |
| Compatible with Solo, Syncro AS and Syncro |
| control equipment |
| 24V DC powered. Low standby supply current |
| Hochiki ESP protocol |
| LIOU |
| Four optically isolated inputs |
| Four volt free changeover relay contact outputs |
| 24V DC powered. Low standby supply current |
| Small footprint |
| Cost effective for concentrated I/O applications |
| Built in short circuit isolator |
| Compatible with Syncro and Syncro AS |
| addressable fire control panels |
| Hochiki ESP protocol |
| Mô tả | Chi tiết |
| MIOU | |
| Boxed unit battery capacity | 2.6Ah 12V (2 per unit) |
| Finish - lid & box | Epoxy powder coated |
| Colour - lid & box | BS 00-A-05 grey - fine texture |
| Boxed unit IP rating | IP30 |
| Module mounting | Symmetrical or asymmetrical din rail |
| Communication protocol | Hochiki ESP |
| Supply voltage H6600001 | 24V DC |
| Supply voltage H6675001 | 110 or 230V AC 50 or 60 Hz. (specify when ordering, default is 230V) |
| Quiescent supply current | 10 milliamps |
| Input operated current | 3 milliamps |
| Output operated current | 18 milliamps |
| Input trigger resistance | 1k maximum |
| Output contact rating | 30V DC 1 Amp maximum |
| Switched -ve output | 65 milliamps maximum per output |
| Minimum recommended PSU | 750 milliamps at 24V DC |
| Operating temperature | -5 to +40 deg. C |
| Device sub-address count | 17 (of 800 permitted in Syncro / Syncro AS panel) |
| Address setting | Hochiki hand held programmer (see TB1010) |
| LIOU | |
| Boxed unit battery capacity | 2.6Ah 12V (2 per unit) |
| Finish - lid & box | Epoxy powder coated, |
| Colour - lid & box | BS 00 A 05 grey - fine texture |
| Module mounting | 4 x 4mm holes in PCB |
| Communication protocol | Hochiki ESP |
| Supply voltage | 21 to 30V DC |
| (K507 & HL6600M2) | 230V AC |
| Supply voltage (HL66750M2) | 20mm ceramic 2A/250V fast acting |
| Mains fuse for HL67750M2 | 10 milliamps |
| Quiescent supply current | 3 milliamps |
| Input operated current | 18 milliamps |
| Output operated current | 1K maximum |
| Input trigger resistance | 30V DC/2A - 230V AC/0.5A |
| Output contact rating | 750 milliamps at 24V DC |
| minimum recommended PSU | -5 to +40 deg. C |
| Operating temperature | 17 (of 800 permitted in Syncro/ Syncro |
| Device sub-address count | AS panel) |
